Browse 961 Chemical Products and Raw Materials
Moxifloxacin
Moxifloxacin is a fourth-generation synthetic fluoroquinolone antibacterial agent. Its antibacterial spectrum includes enteric Gram-(−) rods (Escherichia coli, Proteus species, Klebsiella species), Haemophilus influenzae, atypical bacteria (Mycoplasma, Chlamydia, Legionella), and Streptococcus pneumoniae, and anaerobic bacteria. It differs from earlier antibacterials of the fluoroquinolone class such as levofloxacin and ciprofloxacin in having greater activity against Gram-positive bacteria and anaerobes. Because of its potent activity against the common respiratory pathogen Streptococcus pneumoniae, it is considered a "respiratory quinolone".
Mubritinib
Mubritinib (TAK-165) is a potent Neu (HER2) and Cdc2 p34 inhibitor with IC50 of 6 nM and 0.2μM, respectively. TAK 165
Murexide
Red purple powder. It can form complex of various colors with many cations. Its aqueous solution is dark purple, dark blue in alkaline solution, red in combination with calcium ion, and colorless in acid solution. Slightly soluble in cold water, the aqueous solution is easy to deteriorate, insoluble in diol and ether.
Myclobutanil
Myclobutanil is an fungicide used on a wide range of food crops. Myclobutanil inhibits the biosynthesis of ergosterol, a critical componet of fungal cell membranes.
N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine
This product is a kind of pollution antioxidant. In addition to its good anti oxygen effect, it also has the functions of anti ozone, anti bending and cracking, and inhibiting harmful metals such as copper and manganese. Its performance is similar to that of antioxidant 4010NA, but its toxicity and skin irritation are less than 4010NA, and its solubility in water is better than 4010NA (washing loss rate: 4010NA is 50%, while 4020 is only 15-20%). It can be widely used in the preparation of tire, rubber belt and many other industrial rubber products. The general dosage is 0.5-1.5%. This product is not suitable for making light colored products because of its serious pollution. Antioxidant 4020 is one of the main varieties of p-phenylenediamine antioxidant. At present, p-phenylenediamine antioxidant is the main excellent product commonly used in rubber industry at home and abroad, and it is also the development direction of antioxidant in the future.
N-Butane
A gaseous alkane with the molecular formula C4H10. In oil and gas. There are two isomers: straight chain n-butane and branched isobutane. Both of them are colorless combustible gases at normal temperature and pressure.
N-Cyclohexyl-2-benzothiazolesulfenamide
CZ, scientific name of n-cyclohexyl-2-benzothiazolesulfonamide, is a highly active after effect semi overspeed accelerator with excellent scorch resistance, safe processing and short curing time. The addition of basic accelerants, such as thiuram and dithiocarbamate, can enhance their activity and is suitable for all kinds of rubber with slight discoloration and no frost spray. The vulcanized rubber products are resistant to aging, tensile strength and constant elongation, and are suitable for manufacturing industrial rubber products such as tires, rubber shoes and cables. It is suitable for the use of furnace black rubber materials, such as natural rubber, butyl rubber, isoprene rubber, styrene butadiene rubber, nitrile rubber, EPDM rubber, etc. it is characterized by excellent scorch resistance, short curing time, frost free, aging resistance, heat resistance, cracking resistance and wear resistance. It can be used as a curing accelerator alone or in combination with other accelerators such as D, DT, TT, TS, etc. It is used to prepare tire, tape, cable, hose and other general industrial products.
N-Cyclohexyldi
N, N- two methyl cyclohexanamine can be used in a wide range of rigid foam. One of the main applications is insulating foam, including sprays, plates, adhesive sheets and refrigerated formulations. N, N- two methyl cyclohexanamine is also suitable for the manufacture of rigid foam furniture frame and decorative parts. The catalyst can be used as the main catalyst in the hard foam products, without adding organic tin, and can also be supplemented with JD series catalyst according to the process and product requirements. It is also used as an intermediate of rubber accelerator and synthetic fiber.
N-Isopropyl-N'-phenyl-1,4-phenylenediamine
Natural rubber, synthetic rubber and latex are general-purpose excellent anti-aging agents, which have excellent anti-aging properties for ozone, flex cracking, heat, oxygen, light and general aging. It is often used to manufacture products with high static stress, such as aircraft and automobile tires, bicycle tires, cables, rubber tubes, tapes, rubber rollers and other industrial rubber products. The product is polluting and not suitable for light colored rubber products.
N,N-Bis-(3-aminopropyl)-dodecyl Amine
Laurylaminedipropylenediamine is an amine derivative with excellent antistatic, emulsifying, lubricating, solubilizing, antibacterial, bactericidal and antiseptic properties. It can be used as antistatic agent, as emulsifier and dispersant. It can also be used as a viscosity control agent, conditioner, etc. in the field of personal care products.
N,N-Diethyl-p-phenylenediamine Sulfate
White or reddish crystals. Soluble in water, slightly soluble in alcohol. It is easily oxidized and pink. The melting point is 184-186 ℃.
N,N-Dimethylbenzylamine
Colorless to yellowish liquid with ammonia odor. It can be mixed with alcohol and ether, soluble in hot water, slightly soluble in cold water. It can be used as catalyst, corrosion inhibitor, neutralizer and organic synthesis.
N,N-Dimethylformamide
Dimethylformamide is abbreviated as DMF. It is a compound produced by replacing the hydroxyl group of formic acid with a dimethylamino group, with the molecular formula HCON(CH3)2. It is a colorless, transparent, high-boiling liquid with a light amine taste and a relative density of 0.9445 (25°C). Melting point -61°C. The boiling point is 152.8°C. The flash point is 57.78°C. The vapor density is 2.51. The vapor pressure is 0.49kpa (3.7mmHg25°C). The self-ignition point is 445℃. The explosion limit of vapor and air mixture is 2.2 ～ 15.2%. Exposure to open flames and high heat can cause combustion and explosion.
N O-Bis(trimethylsilyl)acetamide
N,O-Bis(trimethylsilyl)acetamide is used for the preparation of cephalosporin medicine; BSA products is an important pharmaceutical intermediates, mainly used for the production of synthetic cephalosporin antibioticsWe can customize according to customer's requirement.
N-Vinyl-2-pyrrolidone
N-vinylpyrrolidone is referred to as NVP, also known as 1-vinyl-2-pyrrolidone, N-vinyl-2-pyrrolidone. It is a colorless or light yellow transparent liquid with slight odor at room temperature, easily soluble in water and other organic solvents. Because N-vinylpyrrolidone can increase various physical and chemical properties of products, it is widely used: in radiation medicine, wood floor industry, paper or cardboard industry, packaging materials, screen ink industry, the use of NVP improves the physical properties of products.
Β-Naphthol
2-Naphthol, or β-naphthol, is a fluorescent colorless crystalline solid with the formula C10H7OH. It is an isomer of 1-naphthol, differing by the location of the hydroxyl group on the naphthalene ring. The naphthols are naphthalene homologues of phenol, but more reactive. Both isomers are soluble in simple alcohols, ethers, and chloroform. 2-Naphthol is a widely used
Naproxen Sodium 26159-34- 2 Sodiumnaprosyn
It is commonly used for the reduction of pain, fever, inflammation, and stiffness caused by conditions including migraine, osteoarthritis,kidney stones, rheumatoid arthritis, psoriatic arthritis, gout, ankylosing spondylitis, menstrual cramps, tendinitis, and bursitis, among others. It is also used for the treatment of primary dysmenorrhea.
Narasin
Narasin is a tricyclic antidepressant (TCA), but it has different pharmacological properties than typical TCAs as recent research
Neodymium Oxide
Neodymium oxide is mainly used as colorant for glass and ceramics, raw material for manufacturing metal neodymium and strong magnetic neodymium iron boron. Adding 1.5% - 2.5% nano neodymium oxide to magnesium alloy or aluminum alloy can improve the high temperature performance, air tightness and corrosion resistance of the alloy, which is widely used as aerospace materials. In addition, nano-sized yttrium aluminum garnet doped with nano-sized neodymium oxide produces short wave laser beam, which is widely used in industry for welding and cutting of thin materials with thickness less than 10 mm. In medical treatment, nano neodymium oxide doped yttrium aluminum garnet laser is used instead of scalpel to remove or disinfect wound. Nano neodymium oxide is also used for coloring glass and ceramic materials, as well as rubber products and additives.
Nicarbazine
Nicarbazine is a broad spectrum coccidiostat. Its inhibitory action occurs on second-generation schizonts(day 4 in the life cycle) ,so it does not easily develop resistance. It has been approved for prevention and control of coccidiosis in many countries.
Nicergoline
1-methyl-lumilysergol8-(5-bromonicotinate)10-methylether
Niclosamide
Niclosamide (trade name Niclocide) is a teniacide in the anthelmintic family especially effective against cestodes that infect humans and many other animals. It is a salicylanilide compound (5-chloro-N-(2-chloro-4-nitrophenyl)-2-hydrobenzamide) also used as a piscicide.
Niclosamide Ethanolamine Salt
Niclosamide ethanolamine salt is a chemical substance with the molecular formula of c15h15cl2n3o5. Do not let undiluted or large amount of products that are slightly harmful to water contact with groundwater, watercourse or sewage system. Do not discharge materials into the surrounding environment without permission of the government.
Nicosulfuron
Nicosulfuron is a kind of herbicides belonging to the sulfonylurea family. It is a broad-spectrum herbicide that can controls many kinds of maize weeds including both annual weeds and perennial weed including Johnsongrass, quackgrass, foxtails, shattercane, panicums, barnyardgrass, sandbur, pigweed and morningglory. It is a systemic selective herbicide, being effective in killing plants near the maize. This selectivity is achieved through maize's capability of metabolizing Nicosulfuron into harmless compound. Its mechanism of action is through inhibiting the enzyme acetolactate synthase (ALS) of the weeds, blocking the synthesis of amino acids such as valine and isoleucine, and finally inhibiting the protein synthesis and causing death of weeds.
