Teraethyl Lead
Tetraethyl lead is a metal organic compound, its structure is a lead atom and four ethyl molecules together.
| Payment & Shipping Terms | Supply Capacity | ||
|---|---|---|---|
| Payment Terms: | T/T, WU | Production Capacity: | 300T/year |
| Min. Order: | 100KG | Packing: | according to the customer's requirements |
| Means of Transport: | Ocean, Air, Land | Delivery Date: | 7 days |
Teraethyl Lead
CAS 78-00-2
Tetraethyl lead is a metal organic compound, its structure is a lead atom and four ethyl molecules together.
Once widely used as additive tetraethyl lead in gasoline, in order to improve the fuel octane number, in order to prevent the stun occurs in the engine, so that they can use the higher compression ratio, in order to improve the efficiency of car engines and power. Initially using tetraethyl lead additives in the United States, compared with the first use of alcohol as additive of Europe. Leaded gasoline from its high energy content and the advantages of high storage quality, eventually became the universal use of fuel additives. One of the biggest advantages of tetraethyl lead than other antiknock agent or use high octane number gasoline mixture proportion, need only a very low concentration, to increase the octane value of the fuel. The typical preparation methods, is a fluid of ethyl (containing tetraethyl lead) untreated gasoline added to 1260 points. Other antiknock agent must, in a relatively large amounts of weight and/or are lower than those of the energy value of natural gas. High energy values of leaded gasoline will have greater fuel efficiency.
We can customize according to customer's requirement
If you have any question pls mail us or call us.
| CAS Number | 78-00-2 |
|---|---|
| Appearance | Light yellow liquid |
| Purity %≥ | 61.48 |
| Flashing point | 84 °F |
| Density | 1.6g/mL at 25 °C(lit.) |
| Boiling point | 84-85 °C15 mm Hg(lit.) |
| Melting point | -136 °C(lit.) |
Send an inquiry for Teraethyl Lead
Related products
CYCLOPENTADIENYLMANGANESE TRICARBONYL
Cyclopentadienyl Manganese Tricarbonyl (CMT) is an economical kind of additives to remarkably increase the octane number of the gasoline and to reduce the harmful ingredients in tail gas of cars. This product is a manganese base composite octane number improver that cooperatively developed by our company. According to the evaluating results in some Chinese refineries, it is proved that this product is a perfect clean gasoline antiknock with very prominent effect.
Ferrocene
Ferrocene is an organic transition metal compound with aromatic properties, also known as dicyclopentadienyl iron and dicyclopentadienyl iron, The molecular structure contains one divalent iron cation and two cyclopentadienyl anions. It is the raw material for the production of Ferrocenecarboxylic Acid. In the past 50 years, human beings first used cyclopentadiene magnesium bromide to react with anhydrous iron trichloride to produce. At room temperature, it is orange yellow needle crystal and powder, with the smell similar to camphor, It is a non-polar compound, which is easily soluble in methanol, ethanol, ether, petroleum ether, gasoline, kerosene, diesel, dichloromethane, benzene, toluene, xylene and other organic solvents. Because of the large polarity of ethanol, it is usually better to use toluene for dissolution. Insoluble in water, soluble in concentrated sulfuric acid, insoluble in boiling caustic soda solution and hydrochloric acid. It has high thermal stability, chemical stability and radiation resistance. It is widely used in industry, agriculture, medicine, aerospace, energy conservation, environmental protection and other industries.
MMT
At present, most refineries in China use CMT to replace tetraethyl lead, but the solubility of CMT in gasoline is relatively small, which limits its use. MMT overcomes the shortcomings of CMT. The MMT used in China now mainly depends on import, so the development of new synthesis process of MMT can greatly promote the use of unleaded gasoline in China and save a lot of foreign exchange for the country.
MTBE
It is a kind of gasoline additive with high octane number. Its chemical oxygen content is much lower than that of methanol, which is good for warm-up and fuel saving. Its latent heat of evaporation is low, and it is good for cold start. It is commonly used in the blending of unleaded gasoline and low lead oil. It can also be re cracked to isobutylene as raw material of rubber and other chemical products. The best quality methyl tert butyl ether, which can be used as medicine, is a medicine intermediate. Commonly known as "medical MTBE" or "medical MTBE". The toxicity and danger of MTBE should also be paid attention to in the process of storage and use.
