Soluble Rubber
Working (dissolving) temperature: 70-110℃Working environment: clean water or 1%-3% potassium chloride (KCL) The combination of pressure bearing and soluble metal can reach 50-70Mpa and
Vulcanization data
| Project | Actual data |
|---|---|
| Curing time | 150°40h |
| T10 | 1 |
| T90 | 22.2 |
| Maximum torque | 4.46 Nm max |
| Minimum torque | 0.87 Nm min |
Product feature
Working (dissolving) temperature: 70-110℃Working environment: clean water or 1%-3% potassium chloride (KCL) The combination of pressure bearing and soluble metal can reach 50-70Mpa and
sealing for 24h. Technical requirements: 150h to completely dissolve non-strength mud pack or
non-strength block.
The above are the parameters of our basic soluble rubber, we can also customize the corresponding rubber according to the working conditions provided by customers, and we can also customize rubber parts such as finished rubber cans according to the drawings
| CAS Number | Available on request |
|---|---|
| Category | Dissolving Frac Ball and Metal |
Send an inquiry for Soluble Rubber
Related products
Dissolvable Frac Ball Type D
The product can be used in the opening of layered fracturing sliding sleeve. For fracturing horizontal well of a large bridge plug piecewise.
Dissolvable Frac Ball Type K
The product can be used in the opening of layered fracturing sliding sleeve. For fracturing horizontal well of a large bridge plug piecewise.
Dissolvable Frac Balls Type B
The product can be used in the opening of layered fracturing sliding sleeve. For fracturing horizontal well of a large bridge plug piecewise.
Dissolvable Frac Balls Type C
The product can be used in the opening of layered fracturing sliding sleeve. For fracturing horizontal well of a large bridge plug piecewise.
Dissolvable Frac Balls Type M
The product can be used in the opening of layered fracturing sliding sleeve. For fracturing horizontal well of a large bridge plug piecewise.
