DPX-T5648
Used to control annual and perennial grasses and broadleaf weeds on landscapes, rights-of-ways, fence rows, forests, industrial structure areas and non-crop land.
| Payment & Shipping Terms | Supply Capacity | ||
|---|---|---|---|
| Payment Terms: | T/T, WU | Production Capacity: | 500T/year |
| Min. Order: | 25KG | Packing: | according to the customer's requirements |
| Means of Transport: | Ocean, Air, Land | Delivery Date: | 7 days |
DPX-T5648
CAS: 74222-97-2
Melting point:203-205°C
Boiling point:197°C (rough estimate)
Density:1.48
Refractive index:1.6000 (estimate)
Used to control annual and perennial grasses and broadleaf weeds on landscapes, rights-of-ways, fence rows, forests, industrial structure areas and non-crop land.
| CAS Number | 74222-97-2 |
|---|---|
| Model | CAS:74222-97-2 |
| Place of Origin | Zhejiang,China (Mainland) |
| CAS | 74222-97-2 |
| Melting point | 203-205°C |
| Boiling point | 197°C (rough estimate) |
| Density | 1.48 |
| Refractive index | 1.6000 (estimate) |
Send an inquiry for DPX-T5648
Related products
1,1-DICHLOROPINACOLIN
Diclofenac is an intermediate of the herbicide oxazinone and has been used in the past to prepare triazolone fungicides.
1-Naphthaleneacetic Acid
1-naphthylacetic acid, also known as naphthylacetic acid and α - naphthylacetic acid, is a broad-spectrum plant growth regulator. Its physiological function and mechanism are similar to indoleacetic acid, which can promote cell division and expansion, induce the formation of adventitious roots, increase fruit setting, prevent fruit falling, and change the ratio of female and male flowers. It can enter the plant through the tender epidermis and seeds of leaves and branches, and then be transported to the whole plant with nutrient flow. 1-naphthylacetic acid was synthesized by condensation of naphthalene and chloroacetic acid in the presence of catalyst potassium chloride or aluminum powder. Due to the low solubility of NAA in water, NAA is often made into sodium salt for dissolution and use. The dosage is very small, and the concentration is only about 10 ppm. It takes only a few tens of grams to convert 10000 M2 (15 mu) of land into effective ingredients. If the concentration of the solution is too high, it will inhibit the growth of plants. After soaking rice seeds in 10 ppm NAA solution for 2 hours, the seedlings returned to green quickly, had strong vitality, thick straw, and could increase yield. Spraying it on cotton plants and fruit trees can prevent cotton buds and bolls from falling off, keep fruit trees from falling before picking, and keep tomatoes and melons from falling.
2,3-Dichloro-5-(trifluoromethyl)pyridine
2,3-dichloro-5-trifluoromethylpyridine is the intermediate of diflubenzuron and diflubenzuron, and it can also be used to synthesize the herbicide flupyrifenone.
2 4 Dichloroacetophenone
We can customize according to customer's requirement.
2,4-Dichlorophenoxyacetic Acid
White crystal. Melting point: 138 ℃, boiling point: 160 ℃ (53pa). Soluble in ethanol, acetone, ether, benzene and other organic solvents, insoluble in water. The oral ld50375mg / kg of rats. As a chemical antiseptic and bactericide, it can be used for the fresh-keeping of vegetables and fruits according to the regulations of our country. The maximum usage is 0.01g/kg, and the residue is not more than 2.0mg/kg.
2.4-Disooctyl ester
Synonym:2,4-D ISOOCTYL ESTER;2-Ethyl-4-methylpentyl 2,4-dichlorophenoxyacetate;ISOOCTYL-2,4-DICHLOROPHENOXY ACETATE;(2,4-dichlorophenoxy)-aceticaciisooctylester;(2,4-dichlorophenoxy)-aceticaciisooctylester[qr];2,4-dichlorophenoxyaceticacid,isooctylester;2,4-dichlorophenoxyaceticacidisooctylester;2,4-dichlorophenoxyaceticacidisooctylester . Light brown oily single-phase liquid
2-Chloro-5-chloromethylpyridine
2- chloro-5-chloromethylpyridine is colorless crystal, m.p.35-36 ℃, b.p.88-90 ℃ / 400pa, industrial product is orange red liquid or viscous, with pungent smell, soluble in a variety of organic solvents, weak alkali, soluble in organic acids. 2-chloro-5-chloromethylpyridine is the intermediate of imidacloprid and acetamiprid.
2-Chloro-5-chloromethylpyridine
2-Chloro-5-chloromethylpyridine is used for the synthesis of various pharmaceutical compounds. It can also be used for the synthesis of new neonicotinoid compounds1, having insecticidal activity. It is the raw material of pesticide products such as imidacloprid, acetamiprid as well as bactericide and herbicide2,3.
