Dimethoate
Also known as: CEKUTOATE
Pure product is white crystal, industrial product is light yellow solid or light yellow liquid with garlic odor. m. P.52-52.5 ℃, relative density 1.277 (20 ℃). Refractive index n65d1.5334 (65 ℃), volatility 0.107mg/m3. The vapor pressure is 1.13 × 10-3pa (25 ℃). At room temperature, the solubility is 80% methanol, 70% acetone, 70% dichloromethane, 65% chloroform, 65% cyclohexanone, 60% benzene, 40% toluene, 6.5% xylene, 2.0% carbon tetrachloride, 0.1% petroleum ether, and 2.9% in water. It is stable in the acid medium chemical book, easy to hydrolyze in the alkaline medium, k = 6.8min-1.mol-1 (25 ℃), and heavy metal ions (copper, manganese, iron) have catalytic hydrolysis. The hydrolysis rate T1 / 2 in aqueous solution is as follows: > 100D (pH 4,21 ℃), 120h (pH 7,20 ℃), 6.5h (pH 9,70 ℃), 1min (pH 13,21 ℃). In the storage period, it will decompose slowly, the decomposition speed is related to the purity and temperature, the purity is high, the temperature is low, the decomposition speed is slow, 40% emulsifiable oil is stored at room temperature for one year, the content drops about 5%. The thermal stability is poor and isomerization occurs during heating.
| Payment & Shipping Terms | Supply Capacity | ||
|---|---|---|---|
| Payment Terms: | T/T, WU | Production Capacity: | 500T/year |
| Min. Order: | 25KG | Packing: | according to the customer's requirements |
| Means of Transport: | Ocean, Air, Land | Delivery Date: | 7 days |
Dimethoate
CAS 60-51-5
Pure product is white crystal, industrial product is light yellow solid or light yellow liquid with garlic odor. m. P.52-52.5 ℃, relative density 1.277 (20 ℃). Refractive index n65d1.5334 (65 ℃), volatility 0.107mg/m3. The vapor pressure is 1.13 × 10-3pa (25 ℃). At room temperature, the solubility is 80% methanol, 70% acetone, 70% dichloromethane, 65% chloroform, 65% cyclohexanone, 60% benzene, 40% toluene, 6.5% xylene, 2.0% carbon tetrachloride, 0.1% petroleum ether, and 2.9% in water. It is stable in the acid medium chemical book, easy to hydrolyze in the alkaline medium, k = 6.8min-1.mol-1 (25 ℃), and heavy metal ions (copper, manganese, iron) have catalytic hydrolysis. The hydrolysis rate T1 / 2 in aqueous solution is as follows: > 100D (pH 4,21 ℃), 120h (pH 7,20 ℃), 6.5h (pH 9,70 ℃), 1min (pH 13,21 ℃). In the storage period, it will decompose slowly, the decomposition speed is related to the purity and temperature, the purity is high, the temperature is low, the decomposition speed is slow, 40% emulsifiable oil is stored at room temperature for one year, the content drops about 5%. The thermal stability is poor and isomerization occurs during heating.
We can customize according to customer's requirement
if you have any question pls mail us or call us.
| CAS Number | 60-51-5 |
|---|---|
| Molecular Formula | C5H12NO3PS2 |
| Molecular Weight | 229.26 |
| Place of Origin | Zhejiang,China (Mainland) |
Send an inquiry for Dimethoate
Related products
1,1-DICHLOROPINACOLIN
Diclofenac is an intermediate of the herbicide oxazinone and has been used in the past to prepare triazolone fungicides.
1-Naphthaleneacetic Acid
1-naphthylacetic acid, also known as naphthylacetic acid and α - naphthylacetic acid, is a broad-spectrum plant growth regulator. Its physiological function and mechanism are similar to indoleacetic acid, which can promote cell division and expansion, induce the formation of adventitious roots, increase fruit setting, prevent fruit falling, and change the ratio of female and male flowers. It can enter the plant through the tender epidermis and seeds of leaves and branches, and then be transported to the whole plant with nutrient flow. 1-naphthylacetic acid was synthesized by condensation of naphthalene and chloroacetic acid in the presence of catalyst potassium chloride or aluminum powder. Due to the low solubility of NAA in water, NAA is often made into sodium salt for dissolution and use. The dosage is very small, and the concentration is only about 10 ppm. It takes only a few tens of grams to convert 10000 M2 (15 mu) of land into effective ingredients. If the concentration of the solution is too high, it will inhibit the growth of plants. After soaking rice seeds in 10 ppm NAA solution for 2 hours, the seedlings returned to green quickly, had strong vitality, thick straw, and could increase yield. Spraying it on cotton plants and fruit trees can prevent cotton buds and bolls from falling off, keep fruit trees from falling before picking, and keep tomatoes and melons from falling.
2,3-Dichloro-5-(trifluoromethyl)pyridine
2,3-dichloro-5-trifluoromethylpyridine is the intermediate of diflubenzuron and diflubenzuron, and it can also be used to synthesize the herbicide flupyrifenone.
2 4 Dichloroacetophenone
We can customize according to customer's requirement.
2,4-Dichlorophenoxyacetic Acid
White crystal. Melting point: 138 ℃, boiling point: 160 ℃ (53pa). Soluble in ethanol, acetone, ether, benzene and other organic solvents, insoluble in water. The oral ld50375mg / kg of rats. As a chemical antiseptic and bactericide, it can be used for the fresh-keeping of vegetables and fruits according to the regulations of our country. The maximum usage is 0.01g/kg, and the residue is not more than 2.0mg/kg.
2.4-Disooctyl ester
Synonym:2,4-D ISOOCTYL ESTER;2-Ethyl-4-methylpentyl 2,4-dichlorophenoxyacetate;ISOOCTYL-2,4-DICHLOROPHENOXY ACETATE;(2,4-dichlorophenoxy)-aceticaciisooctylester;(2,4-dichlorophenoxy)-aceticaciisooctylester[qr];2,4-dichlorophenoxyaceticacid,isooctylester;2,4-dichlorophenoxyaceticacidisooctylester;2,4-dichlorophenoxyaceticacidisooctylester . Light brown oily single-phase liquid
2-Chloro-5-chloromethylpyridine
2- chloro-5-chloromethylpyridine is colorless crystal, m.p.35-36 ℃, b.p.88-90 ℃ / 400pa, industrial product is orange red liquid or viscous, with pungent smell, soluble in a variety of organic solvents, weak alkali, soluble in organic acids. 2-chloro-5-chloromethylpyridine is the intermediate of imidacloprid and acetamiprid.
2-Chloro-5-chloromethylpyridine
2-Chloro-5-chloromethylpyridine is used for the synthesis of various pharmaceutical compounds. It can also be used for the synthesis of new neonicotinoid compounds1, having insecticidal activity. It is the raw material of pesticide products such as imidacloprid, acetamiprid as well as bactericide and herbicide2,3.
